Fass install
#1
#6
gently stretch the spring a little.
should be a spring and ball behind the return fitting. the spring pushes the ball against the hole blocking fuel from returning till fuel pressure rises enough to overpower the spring and push the ball back allowing fuel to return to the tank. stretching the spring slightly will increase spring pressure against the ball thus raising fuel pressure.
should be a spring and ball behind the return fitting. the spring pushes the ball against the hole blocking fuel from returning till fuel pressure rises enough to overpower the spring and push the ball back allowing fuel to return to the tank. stretching the spring slightly will increase spring pressure against the ball thus raising fuel pressure.
Thread
Thread Starter
Forum
Replies
Last Post
JoeyMiR
24 Valve 2nd Gen Dodge Cummins 98.5-02
9
02-03-2018 10:05 PM
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:55 PM
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:28 PM
gumborancher
24 Valve 2nd Gen Dodge Cummins 98.5-02
6
04-24-2015 01:25 PM